- 19 -
Italiano
Cleaning the filter-holder gasket:
- Clean with a soft brush to remove coffee deposits (fig. 23).
Cleaning the external surface of the appliance:
- Never use solvents, simply use a cloth dampened with hot
water and mild detergent.
Cleaning the liquid drip tray and the cup support grid.
- REMEMBER - return the liquid drip tray into position before
closing the coffee maker door.
- Open the door A, pull the tray with the grid forward and
remove it. (fig. 24).
- The liquid drip tray 13 is provided with a float 14 that indicates
the liquid level. When the quantity of liquid increases, the
float will rise (fig. 24).
To ensure correct operation, the float and its housing must
be cleaned frequently.
- The appliance is equipped with a microswitch that sets
the appliance on "OFF" as soon as the user removes the
liquid drip tray for cleaning. The appliance will restore its
correct operation after the user has inserted the tray in its
housing and closed the door A.
- Periodically clean the liquid drip tray 13 and the cup support
grid 12 with fresh water and liquid soap. The liquid drip tray
can be washed in the dishwasher.
- Dry all the parts before replacing them.
- Remove any drops or dust from the external surfaces with
a cloth dampened with water.
- In case of undesired water deposits, wash the appliance
with a suitable brush.
Cleaning the water tank:
- Clean the tank (Part 11 - see page 12) with water and soap
and rinse thoroughly.
Dispenser decalcification:
- The dispenser decalcification must be performed
approximately every six months or earlier if required.
- For the dispenser decalcification we recommend to contact
a qualified technician from an authorised service centre.
Decalcification can also be performed by the final user, using
specific products purchased from the manufacturer.
fig.23
fig.24
13
12
13
14
fig.24
