- 15 -
- Press the coffee dispenser button 3, the indicator light 4
goes on. Once you have reached the desired level, press
the button 3 again to stop the dispensing, the indicator light
4 goes off. (fig. 17).
The preparation of a single-dose coffee has been completed.
• HOW TO MAKE DOUBLE-DOSE COFFEE
NOTE! if it is not possible to follow the sequence below, refer
to the "TROUBLESHOOTING" section.
- Insert the spring (K3), if not inserted yet, in the filter-holder
(K2). (fig. 12)
This operation must not be repeated again, except in case
of spring breakage.
- Insert the double filter (K5) in the filter-holder (K2). (fig. 18)
- To start grinding the coffee beans, bring the filter-holder
(K2) with the empty filter close to the ground coffee dispenser
C and press the button D once. Wait until the grinder stops
and press the button again.
You have ground the correct quantity for two coffee cups.
(ref. page 15, fig. 14)
- Press coffee uniformly with the coffee presser (K6) (fig. 15).
- Clean the filter border.
- Insert the filter-holder (K2) in the dispenser by rotating it in
the attachment until it is firmly tightened (fig. 16)
- Place the two cups under the nozzles.
- Press the coffee dispenser button 3, the indicator light 4
goes on.
- Once you have reached the desired level, press the button
3 again to stop the dispensing, the indicator light 4 goes off
(fig. 17).
The preparation of a double-dose coffee has been completed.
fig.17
4
fig.17
4
fig.18
K4
K2
fig.15
K6
K2
fig.12
K3
K2
fig.16
