23
© 2013 Blamsoft, Inc. All rights reserved.
CV Inputs
The CV Inputs allow Viking to be controlled by other devices in the rack. CV inputs generally
affect a current internal level by subtracting when they are negative and adding when they are
positive.
Performance
Gate – This signal triggers the envelopes
Note – The MIDI note to be played
Pitch – Controls the Pitch Wheel level
Mod – Controls the Mod Wheel level
Press – Controls the aftertouch/pressure level
Sust – Sutain Pedal Input
Modulation
Mod 1 – This signal can be selected as a source for the Mod Wheel bus
Mod 2 – This signal can be selected as a source for the On bus
Filters
Cutoff – Controls the cutoff frequency
Resonance – Controls the resonance amount for the filters
LFO
Rate – Adjusts the rate of the LFO with respect to the current rate
Sync – A digital signal that on a rising edge causes the LFO waveform to reset
S+H – A signal that will be used instead of noise for the LFO Sample and Hold circuit
Trig – A signal that will be used instead of the LFO for triggering the Sample and Hold circuit
OSC Wave
OSC1, 2, 3 – Adjusts the waveform setting for each oscillator. See Wave knob.
Summary of Contents for VK-1 Viking
Page 1: ...1 0 6 User Manual ...