18
© 2013 Blamsoft, Inc. All rights reserved.
Common Tricks
One common trick is to use filter envelope (Filt Env) shaping with the filter envelope (Filt Env)
as the source and the filter (Filt) as the destination. This technique can greatly increase the filter
cutoff movement. Note that the source would be selected in the programmer as Filt Env.
Another trick is to use velocity to control the filter cutoff. For this you can use Constant as the
Source, filter (Filt) as the Destination and Velocity as the Shaping. In general, when you want to
use the shaping as an effect you may want to choose Constant as the Source.
If you don’t want to use a modulation bus, set its Amount to zero or choose the source as PGM
with Off selected in the programmer.
See the Programmer section for an explanation of more modulation parameters.
Summary of Contents for VK-1 Viking
Page 1: ...1 0 6 User Manual ...
