Safety Instructions
Overheating:
These amplifiers are intended for use in moderate climates only. They should not be used in tropical regions.
The recommended ventilation clearances and other precautions given in the relevant section of this instruction
leaflet should be observed to prevent overheating. No unit should be fixed where it is likely to become
smothered by soft furnishing fabrics such as curtains, or by thermal insulation material in a roof space or
building void. Mains powered equipment should not be left resting on a carpet
Water and fire risks:
The appliance is not waterproof. It is intended for indoor use only and must not be fixed where it could be
exposed to dripping or splashing water. Objects containing liquids should not be placed on or near the
appliance. To prevent risk of fire, no object with a naked flame should be placed on or near the appliance, or its
associated wiring.
Mains plug and disconnection from the supply:
The appliance is supplied with a standard fused plug fitted. If this is unsuitable, refer to the instructions below.
If you need to change the fuse in the fitted plug, a 3 Amp fuse to BS 1362 carrying the ASTA or BSI approval
mark must be used. Always replace the plastic fuse carrier when renewing the fuse. The plug (or other means of
disconnection from the supply, if used) should remain readily accessible for operation when necessary. The LED
power indicator on this equipment should not be regarded as providing reliable indication of supply
disconnection.
Changing the plug:
If the fitted mains plug is not suitable for the socket
-
outlets in use, it should be cut off and a new plug fitted...
Wiring the new plug:
Instructions supplied with the new plug should be followed. The brown wire must be
connected to the live (L) terminal of the plug and the blue wire to the neutral (N) terminal. Neither wire should
be connected to the earth (E) terminal of a 3
-
pin plug (the appliance does not require an earth connection).
Ensure that the cord grip in the plug is correctly used and clamps the sheath of the cord firmly.
Fuse Rating:
If the new plug is a fused type, the fuse fitted should be rated at not more than 3 Amp.
Caution:
The old plug should be destroyed immediately since it would be dangerous if plugged into a live
socket.
Related Products:
Link to Website:
Distribution Amplifiers: 4, 6 & 8
-
Way FM/DAB/UHF Distribution Amplifiers
www.blake
-
uk.com/proamp24
-
28
PROSAT1EYE: IR Control Eye 'Magic Eye
www.blake
-
uk.com/eye
PROLINK22: Flexible 'I/O Link' RF Modulator for Sky
www.blake
-
uk.com/prolink22
PROCON01: F Male Twist
-
On +O
-
Ring
-
RG6/100
www.blake
-
uk.com/procon01
PROCON02: F Male Twist
-
On +O
-
Ring Black
-
RG6/100
www.blake
-
uk.com/procon02
PROCON12: F Male Crimp
-
On Black
-
RG6/100
www.blake
-
uk.com/procon12
PROCON22: F Male Snap Seal / Compression
-
RG6/100
www.blake
-
uk.com/procon22
