Blagdon 1056199 Manual Download Page 10

8

INSTALLATION

Electrical installation

The power supply must meet the specifications on the product.

The air pump is designed to be used with either a weather-proof cable connector 
or connected to the mains by means of a plug and socket.

The cores in the supply cable are coloured in accordance with the following code:

Brown = Live, Blue = Neutral, Green/Yellow = Earth

The electrical cable is permanently connected inside the air pump body.

If the supply cable is damaged the air pump must not be used.

Do not use the supply cable to lift the air pump, as this may cause damage.

For permanent installations to the mains supply, it is necessary to conform to the regulations of 
the local electricity authority and this would include the use of a metal or plastic conduit to  
protect the cable.

Attention has been drawn to the fact that the special rules may exist concerning the installation 
of your pond air pump (i.e. local building regulations). These air pumps must not be used in  
swimming pools, or areas where people are in contact with the water.

Always disconnect and isolate the product from the mains electricity supply whilst the equipment 
is being installed, repaired, maintained or handled. Consult a qualified electrician if you are in  
any doubt about wiring this product to the mains supply.

WARNING -

 A Residual Current Device (RCD), also known as the Residual Current 

Circuit Breaker (RCCB), with a tripping current not exceeding 30mA must be installed 
in the supply circuit. A means of disconnection from the supply having a contact 
separation of at least 3mm in all poles must be incorporated in the fixed wiring.

WARNING - 

The air pumps must not be submerged in the pond, they are for 

external installation only.

This appliance can be used by children aged from 8 years and above and persons with reduced physical, 
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or 
instruction concerning use of the appliance in a safe way and understand the hazards involved.

Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children 
without supervision.

Summary of Contents for 1056199

















Reviews: