Page 8
on the seat post and adjust the height to your
preference and tighten the nut on the
underside of the seat. You are ready to use
your seat kit.
Batteries
The batteries in the XTR-COMP II are stored in a bag and are removable. This also
gives you the option to buy a second pair of batteries which you can swap when a set of
batteries starts to run low. (Fig. 8) For more information about hot swap batteries inquire
us on the web at
www.ebladez.com
or call us toll free at (866) ebladez.
Charging
Your XTR-COMP II should come charged out
of the box. Bladez still recommends charging
the unit for 6-8 hours prior to first use! Bladez
also recommends charging your XTR-COMP II
after every use and prior to storage. The
batteries in the scooter are stored in a bag and
are removable. There is one set of wires
coming out of the bag. You may plug the
charger into either one of the sets of wires.
(Fig. 9)
Warning:
DO NOT
allow your Powerboard to go into deep discharge! – This will
damage the batteries.
Charging Your Scooter
1. Carefully remove the XTR-COMP II from the box and unfold the handle bar.
2. Make sure the unit is turned OFF.
