Page 14
TROUBLESHOOTING GUIDE
The following guide will help assist you in identifying and correcting common problems with your XTR-
COMP II:
Symptoms Potential
Causes:
Solutions:
The charger light turns green
right away
This indicates the batteries are
adequately charged. Most units
come charged in the box.
Continue to charge the batteries
for 6-8 hours prior to initial use.
Batteries do not hold a charge.
Unit does not have specified
travel range.
Batteries have reached the end
of their useful life or poor polarity
between batteries.
Charger is malfunctioning.
Replace batteries.
Replace charger unit.
Unit moves intermittently, or very
slow.
Batteries not fully charged or
polarity problem.
Throttle cable is loose.
Charge or replace batteries.
Tighten cable.
Unit will not move when throttle
lever is activated.
Throttle cable is loose.
Batteries won’t fully charged.
Batteries have reached the end
of their useful life.
Tighten cable.
Replace batteries or charger
Replace batteries.
Unit stops abruptly during use.
Circuit breaker has “tripped”.
Allow electric motor to cool and
re-set circuit breaker by turning
power switch on and off.
NOTE: You may also refer to the multi-function LED section on page 9 for further trouble
shooting.
OTHER QUESTIONS
Where can get replacement and aftermarket parts?
From your local Servicing Dealer or on the web at:
www.ebladez.com
For additional questions, service instruction, further information and important phone numbers, please go
to the Bladez website at
www.ebladez.com
.
If you have any additional questions, please contact Bladez Customer Service Department at
(866) 325-2339
Thank you for purchasing a Bladez Power Board and please tell your friends about how much fun you
had on the Bladez Power Board.
