background image

Page 9 of 18 

7.  Slowly open the GAS CAP, so that 

possible over-pressure disappears.  

8.  Clean the tank cap area to make sure 

that it is free from excess dirt and debris. 
* Make sure that no dirt falls into the gas 
tank. 

9.  Pour pre-mixed Gas/Oil mixture into the 

GAS TANK. * Do not overfill.  

10. After fueling, replace the GAS CAP and 

tighten.  

  
Starting 

Move at least 10 feet away from where 
you filled up the gas.  

 
11. Set the CHOKE LEVER to the CHOKED 

(UP) position. (Fig. 5) 

12. Pull the RECOIL STARTER briskly, 

making sure to hold the handle in your 
grasp. (Fig. 6) * Note: Do not allow it to 
snap back, let it back slowly. You may 
want to give it a little throttle by gently 
squeezing the GAS LEVER. 
  

13. It may be necessary to repeat step 12 

several times until the motor starts 

 

When starting the MOBY for the first 
time, it may be necessary to pull the 
starter handle multiple times until it 
starts.  
*

This is because the gas needs to be drawn 

into the carburetor. 
  
14. Once the engine has started, quickly 

move the CHOKE LEVER into the RUN 
(DOWN) position. (Fig. 5) 

15. After engine is started, let it warm up for 

2-3 minutes before riding.  

 

IF THE MOTOR KEEPS STAHLING AT 
IDLE SPEED, IT MAY BE NECSSARY TO 
ADJUST THE IDLE SPEED ON THE 
CARBURETOR. 
 

Please refer to Carburetor Adjustment in the 
Maintenance section on page 12 for 
instructions on how to adjust idle speed. 
 

Summary of Contents for Moby 35



















Reviews: