Blade NANO QX 3d, Manual

Page: 3 / 13

4 5
EN EN
Length 5.12 in (130mm)
Height 1.65 in (42mm)
Flying Weight 1.00 oz (27 g)
Blade Nano QX 3D Specifications
Blade Nano QX 3D Components BNF RTF
Airframe – Blade Nano QX 3D Included Included
Motors – 6mm Brushed Installed Included
On-board Electronics – 4-in-1 mixer/ESCs/Gyro Installed Included
Battery – 200mAh 1S 3.7V 30C Li-Po Included Included
Charger – 1S USB Li-Po Charger, 500 mAh Included Included
Transmitter – MLP6DSM SAFE ® Transmitter Required Included
To register your product online,visit www.bladehelis.com
Box Contents
• Blade ® Nano QX 3D
• 200mAh 1S 3.7V 30C Li-Po Battery
• 1S USB Li-Po Charger, 500 mAh
• MLP6DSM SAFE Transmitter (RTF Only)
• 4 AA Batteries (RTF Only )
First Flight Preparation
• Remove and inspect contents
• Begin charging the flight battery
• Install the flight battery in the quadcopter (once it has been
fully charged)
• Program your computer transmitter
• Bind your transmitter
• Familiarize yourself with the controls
• Find a suitable area for flying
Flying Checklist
❏
Always turn the transmitter on first
❏
Plug the flight battery into the lead from the 4-in-1 control unit
❏
Allow the 4-in-1 control unit to initialize and arm properly
❏
Fly the model
❏
Land the model
❏
Unplug the flight battery from the 4-in-1 control unit
❏
Always turn the transmitter off last
The Battery Charger (EFLC1013) included with your quadcopter has
been designed to safely charge the Li-Po battery.
CAUTION:
All instructions and warnings must be followed
exactly. Mishandling of Li-Po batteries can result in a fire,
personal injury and/or property damage
• Never leave charging batteries unattended.
• Never charge batteries overnight.
• By handling, charging or using the included Li-Po
battery, you assume all risks associated with lithium batteries.
• If at any time the battery begins to balloon or swell, discontinue
use immediately. If charging or discharging, discontinue and
disconnect. Continuing to use, charge or discharge a battery
that is ballooning or swelling can result in fire.
• Always store the battery at room temperature in a dry area for
best results.
• Always transport or temporarily store the battery in a tem-
perature range of 40–120º F (5–49° C). Do not store battery
or model in a car or direct sunlight. If stored in a hot car, the
battery can be damaged or even catch fire.
• Always charge batteries away from flammable materials.
• Always inspect the battery before charging
• Always disconnect the battery after charging, and let the
charger cool between charges.
• Always constantly monitor the temperature of the battery pack
while charging.
• ONLY USE A CHARGER SPECIFICALLY DESIGNED TO CHARGE
LI-PO BATTERIES. Failure to charge the battery with a compat-
ible charger may cause a fire resulting in personal injury and/or
property damage.
• Never discharge Li-Po cells to below 3V under load.
• Never cover warning labels with hook and loop strips.
• Never charge batteries outside recommended levels.
• Never charge damaged batteries.
• Never attempt to dismantle or alter the charger.
• Never allow minors to charge battery packs.
• Never charge batteries in extremely hot or cold places
(recommended between 40–120° F or (5–49° C) or place in
direct sunlight.
Charging Warnings
Battery Charging
Your aircraft comes with a 1S 3.7V DC Li-Po battery charger and a
1S 3.7V 200mAh 30C Li-Po battery. Refer to the charging warnings. It
is recommended to charge the battery pack while you are inspecting
the aircraft. The flight battery will be required to confirm proper
aircraft operation in future steps.
tooltip
tooltip
USB Li-Po
Charger
EFLC1013
SOLID RED LED
–Charging
DC Input:5.0V 500mA
DC Output:4.2V 500mA
LED OFF
–Charge
Complete
(.74Wh) EFLB2001S30
Horizon Hobby, LLC