Blade FR-TEC Hurricane MKII, Manual, Page: 4 / 39

6 7
BUTTON LAYOUT: BUTTON CONFIGURATION (WITHOUT MEMORY):
CONFIGURABLE BUTTONS:
Buttons , , , , L1, L2, R1, R2 can be assigned to the “L-WING” and “R-WING” shift paddles, the accelerator/gas pedal,
the brake pedal, and the gear shifter.
CONFIGURATION PROCEDURE:
1. Hold the SHARE and OPTIONS buttons down simultaneously for 3 seconds until the channel 4 LED lights up
2. Hold down the lever or the pedal you want to configure until the channel 4 LED starts to blink
3. Hold down the button you want to assign to the lever or pedal until the channel 4 LED goes off
4. Programming is now complete
RESETTING THE BUTTON CONFIGURATION:
1. Hold the SHARE and OPTIONS buttons down simultaneously for 3 seconds until the channel 4 LED lights up
2. Hold down the lever or the pedal you want to configure until the channel 4 LED starts to blink
3. Hold down the lever or pedal you want to configure until the channel 4 LED goes off
4. The resetting process is now complete
ATTENTION: Every time the steering wheel cable is disconnected from the console or the console is rebooted, the
button configuration returns to the default factory settings.
STEERING WHEEL SENSITIVITY:
Please select the sensitivity that best suits your driving style.
The options are Low (default), Mid and High.
To change the degree of one sensitivity mode to another, hold down the “L-WING” and “R-WING” shift paddles and the “ “
button simultaneously until the red LED starts to blink.
LO MID HI
ATTENTION: Every time the steering wheel cable is disconnected from the console or the console is rebooted, the
steering wheel sensitivity returns to Low (the default factory setting).