32
BLACKVUE
Use the
buttons to filter the video list by recording type. The
filter button displays both E (Event) and I (Impact
event while parked) recordings.
Normal
The dashcam records in normal mode by default.
Event
When the dashcam detects an impact while in normal or parking mode, it switches to event mode and
saves an event recording beginning 5 seconds before the event trigger. Exceeding the set speed limit
will also trigger an event recording.
Parking
In parking mode the dashcam continuously buffers video. When motion is detected in the dashcam's
field of view, it saves a parking recording beginning 5 seconds before the motion detection.
Manual
If proximity sensor is set as a manual recording trigger in the firmware settings, touching or waving a
finger within 20mm of the sensor will turn on manual recording.
Note
y
The dashcam requires a constant power source to record in parking mode. See
"Optional accessories" on page 88
for more
information.
y
Depending on the specifications of your computer, the dashcam videos that are recorded at 60fps, may not play smoothly or at
higher speeds (2x, 4x, etc.).
Summary of Contents for DR750S-1CH
