14
BLACKVUE
10
Use the pry tool to lift the edges of the windshield trim/molding and tuck in the power cord.
Rear camera connection cable
Power cord
11
Turn on the engine. The BlackVue dashcam will power up and start recording. Video files a e stored on the microSD card. When the
microSD card fills u , the newest video files will sta t to replace the oldest video files (called
loop recording
) - so you will always
have the most recent video file .
Note
y
The recording LED blinks while recording (default setting) and the GPS LED is on when a GPS signal is received. There are 3
recording modes: Normal, Event and Parking. The dashcam starts recording in normal mode, switches to event mode when an
impact is detected or the set speed limit is exceeded, and switches to parking mode if the vehicle is stationary for 5 minutes.
y
When you run the dashcam f
or the first time the fir
mware is automatically loaded onto the microSD card. After the fi mware
has been loaded onto the microSD card you can customize settings using BlackVue Viewer on a computer.
12
Turn off the en ine. The dashcam will automatically stop recording and power down. To record in parking mode while the engine is
off please install a
Power Magic Battery Pack
(sold separately) or a
Power Magic Pro
(sold separately). A
Power Magic Pro
powers
your dashcam when the engine is off y hardwiring it to the automotive battery. A low voltage power cut-off fun tion and a parking
mode timer protect the automotive battery from discharge.
Summary of Contents for DR470-2CH
Page 1: ......
Page 31: ...DR470 2CH 31 6 Select the microSD card drive and click OK ...
