16
17
output power overload light
Once you have attached a device to the generator
and turned it on, check to ensure that the output
power overload light is NOT illuminated,
see Pic. 13.
If the output power overload light stays
illuminated STOP the device immediately.
This light is only illuminated if the attached device
is faulty or if the devices required power is greater
than the generators ability.
While the output power overload light is
illuminated the output power green light will not
illuminate.
pic. 13
Output power
overload light
pic. 12
pic. 14
Smart throttle
switch
Smart Throttle
pic. 14
The smart throttle is designed to reduce the
fuel consumption of the generator. By turning
this switch ON you will reduce the speed of the
engine and the generator. If a load is required the
generator will automatically increase the speed of
the engine and the generator.
Only turn the smart throttle ON when the
generator has NO devices attached or if the
devices wattage is below 600W.
SAFeTY deViceS
Ac outlet
Your generator is equipped with an output overload light, see above. When this light is illuminated and
the green output power light is out, then the generator will produce NO POWER.
To restart the power supply;
1. Remove the appliance.
2. Stop the generator, see page 17.
3. Wait 5 minutes.
4. Start generator, ensure the green output power light is the only light illuminated.
5. Re - attach the appliance.
6. If the output overload light becomes illuminated and the output power stops the attached appliance is
either faulty or the appliances required power is greater than the generators output