BlackPed RedPed 2, Manual, Page: 7 / 17

E
Bi
ke
T
un
in
g
A
pp
6
TUNING AKTIVIERUNG
WITH EBIKE
MODE HIGH Stepper
Sets how often you need to toggle between the e-
bike support levels "STD" and "HIGH" to enable
tuning. Maximum number 10.
MODE OFF Stepper
Sets how often you need to toggle between the e-
bike support level "OFF" and "ECO +" to activate the
tuning. Maximum number 10.
LIGHT Stepper
Sets the number of times the light button must be
pressed to activate the tuning. Maximum number 10.
COUNTER: 0 Label Counts the rider’s input.
RESET Button Resets all steppers to 0.
TUNING MODE
DIVIDE Button
Divides the speed internally for the engine control
unit.
FREZE Button
Freezes the speed internally for the engine control
unit.
SPEED TO DIVIDE Slider
The speed is internally divided at the set value or
kept constant.
WHEEL SIZE Slider
Sets the wheel diameter in inches. Setting applies to
the module and not to the e-bike.
SHOW REAL VALUES Button
Here you can set whether the e-bike display shows
the values of the e-bike control unit or the
manipulated values of the RedPed.
EBIKE DISPLAY OFFSET Slider
Decreases the speed display by the e-bike display by
the set value.
VISIBILITY Slider
Sets how long a smartphone can connect to the
module after turning on the e-bike.
COMBINATION FOR
VISIBILITY
MODE HIGH Stepper
Sets how often does it have to switch back and forth
between the e-bike support level "STD" and "HIGH"
to make the module visible. Maximum number 10.
MODE OFF Stepper
Sets how often does it have to switch back and forth
between the e-bike support level "OFF" and "ECO +"
to make the module visible. Maximum number 10.
LIGHT Stepper
Sets the number of times the light button must be
pressed to make the module visible. Maximum
number 10.
COUNTER: 0 Label Counts the rider’s input.
RESET Button
Set the stepper MODE HIGH to 0, MODE OFF to 0
and LIGHT to 6.
SET PIN Button Here the 6-digit PIN code can be entered.
SETZE MODULNAME Button Here you can enter the 9-digit module name.