501-C00 Page 2/12
SAFETY DATA
Failure to set the vehicle emergency
brake and chock wheels before
performing service can cause severe
personal injury or property damage
Failure to disconnect and lockout
electrical power before attempting
maintenance can cause shock, burns or
death
Hazardous
machinery can
cause serious
personal injury.
Hazardous voltage.
Can shock, burn or
cause death.
Failure to disconnect and lockout
electrical power or engine drive before
attempting maintenance can cause
severe personal injury or death
Operation without guards in place can
cause serious personal injury, major
property damage, or death.
Hazardous
machinery can
cause serious
personal injury.
Do not operate
without guard
in place
Disconnecting fluid or pressure
containment components during pump
operation can cause serious personal
injury or property damage.
Failure to relieve system pressure prior to
performing pump service can cause
serious personal injury or property
damage.
Systems with meters will still be
pressurized even after the hose is emptied
Hazardous pressure
can cause serious
personal injury or
property damage
Hazardous pressure
can cause serious
personal injury or
property damage
If pumping hazardous or toxic fluids,
system must be flushed and
decontaminated, inside and out, prior to
performing service or maintenance
Hazardous or toxic
fluids can cause
serious injury.
PUMP DATA
PUMP IDENTIFICATION
A pump Identification tag, containing the pump serial number, I.D. number, and model designation, is attached to each pump. It is
recommended that the data from this tag be recorded and filed for future reference. If replacement parts are needed, or if
information pertaining to the pump is required, this data must be furnished to a Blackmer representative.
TECHNICAL DATA
Models
LGLD2E
LGL2E
LGLD3F
LGL3F
Torque required
@100 psi (6.9 bar)
48 lbs ft
(65 Nm)
89 lbs ft
(121 Nm)
Maximum Pump Speed @
Max. Differential Press.
640 RPM
800 RPM*
Maximum Differential Pressure
125 psi
(8.62 Bar)
Maximum Operating
Temperature
240°F
(115°C)
Maximum Working Pressure
350 PSI
(24.1 Bar)
* LGLD3E and LGL3E are rated at 640 RPM maximum.
Technical Data is for standard materials of construction.
Consult Blackmer Material Specs for optional materials
of construction.
These pumps are listed by Underwriters’ Laboratories
for liquefied petroleum gas and NH
3
service.
INITIAL PUMP START UP INFORMATION
Model No.: ____________________________________
Serial No.: ____________________________________
ID No.: _______________________________________
Date of Installation: _____________________________
Inlet Gauge Reading: ____________________________
Discharge Gauge Reading: _______________________
Flow Rate: _____________________________________