Blackmagicdesign Video Assist Installation And Operation Manual Download Page 36

Warranty

Warranty

12 Month Limited Warranty

Blackmagic Design warrants that this product will be free from defects in materials and 
workmanship for a period of 12 months from the date of purchase. If a product proves to be 
defective during this warranty period, Blackmagic Design, at its option, either will repair the 
defective product without charge for parts and labor, or will provide a replacement in exchange 
for the defective product. 

In order to obtain service under this warranty, you the Customer, must notify Blackmagic Design 
of the defect before the expiration of the warranty period and make suitable arrangements for 
the performance of service. The Customer shall be responsible for packaging and shipping the 
defective product to a designated service center nominated by Blackmagic Design, with 
shipping charges pre paid. Customer shall be responsible for paying all shipping charges, 
insurance, duties, taxes, and any other charges for products returned to us for any reason. 

This warranty shall not apply to any defect, failure or damage caused by improper use or 
improper or inadequate maintenance and care. Blackmagic Design shall not be obligated to 
furnish service under this warranty: a) to repair damage resulting from attempts by personnel 
other than Blackmagic Design representatives to install, repair or service the product, b) to repair 
damage resulting from improper use or connection to incompatible equipment, c) to repair any 
damage or malfunction caused by the use of non Blackmagic Design parts or supplies, or d) to 
service a product that has been modified or integrated with other products when the effect of 
such a modification or integration increases the time or difficulty of servicing the product.  
THIS WARRANTY IS GIVEN BY BLACKMAGIC DESIGN IN LIEU OF ANY OTHER WARRANTIES, 
EXPRESS OR IMPLIED. BLACKMAGIC DESIGN AND ITS VENDORS DISCLAIM ANY IMPLIED 
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. 
BLACKMAGIC DESIGN’S RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE PRODUCTS IS 
THE WHOLE AND EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR ANY INDIRECT, 
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES IRRESPECTIVE OF WHETHER 
BLACKMAGIC DESIGN OR THE VENDOR HAS ADVANCE NOTICE OF THE POSSIBILITY OF 
SUCH DAMAGES. BLACKMAGIC DESIGN IS NOT LIABLE FOR ANY ILLEGAL USE OF 
EQUIPMENT BY CUSTOMER. BLACKMAGIC IS NOT LIABLE FOR ANY DAMAGES RESULTING 
FROM USE OF THIS PRODUCT. USER OPERATES THIS PRODUCT AT OWN RISK. 

© Copyright 2017 Blackmagic Design. All rights reserved. ‘Blackmagic Design’, ‘DeckLink’, ‘HDLink’, ‘Workgroup Videohub’, 
‘Multibridge Pro’, ‘Multibridge Extreme’, ‘Intensity’ and ‘Leading the creative video revolution’ are registered trademarks in the 
US and other countries. All other company and product names may be trade marks of their respective companies with which 
they are associated.

59

Summary of Contents for Video Assist





































Reviews: