Blackmagicdesign Teranex Mini HDMI to SDI 12G, Installation And Operation Manual

Page: 30 / 171

30
Teranex Mini - Audio to SDI 12G
Embed two channels of analog audio, or four channels of
AES/EBU digital audio into any SDI video connection. You
can use this Teranex Mini to embed audio from equipment,
such as audio mixers and analog decks, into SDI video connections for use with SDI routers and decks. Additional
SDI audio channels can be embedded by daisy chaining
another Teranex Mini Audio to SDI 12G to your converter’s
SDI output.
Connectors
1. Mini-B USB port
Connects to the Blackmagic Teranex Setup software via
a Mac OS X or Windows computer for adjusting settings
and updating your Teranex Mini’s internal software.
2. Switches
Adjustable switches for changing settings.
3. LED Multi-Use Indicator
Glows white when the converter is receiving power and green
when a valid video input signal is detected. Will flash on/off
to identify individual converters via Blackmagic Teranex Setup.
4. Power
Standard built in IEC C14 connector for 90 - 240 volt AC
power supply.
5. Optical S/PDIF Audio Input
S/PDIF Signal with TOSLINK Connector.
6. L - Unbalanced Analog Line Level Input
Unbalanced left channel analog audio input RCA connector.
7. R - Unbalanced Analog Line Level Input
Unbalanced right channel analog audio input RCA connector.
8. Ethernet PoE
Connects to a network switch or computer so you can
change settings using Blackmagic Teranex Setup. The
Ethernet port also supports power over Ethernet.
9. SDI In
SDI video input BNC connector.
10. SDI Out
SDI video output BNC connector.
11. L - Analog or AES/EBU
Balanced left channel analog audio, or digital AES/EBU
audio input XLR connector.
12. R - Analog, AES/EBU or Timecode
Balanced right channel analog audio, or digital AES/EBU
audio input XLR connector. Can also be configured for
timecode input.
Switches
Teranex Mini Audio to SDI 12G’s switches provide the
following settings:
Switch 8, 7 - Input Audio Selection Bit 1, 0
Switches 8 and 7 are represented as bits 1 and 0,
respectively. This simply means that by setting various
on/off combinations for switches 8 and 7 you can select
from four input audio options.
Switch 6, 5, 4 - Embed Audio Bit 2, 1, 0
Switches 6, 5, and 4 are represented as bits 2, 1, and 0,
respectively. This simply means that by setting various
on/off combinations for switches 6, 5, and 4 you can select
which channels of your SDI signal you wish to embed
audio into.
If you are embedding analog audio, there are eight
combinations, allowing you to embed audio into the channel
pairs from 1-2 through to 15-16.
If you are embedding AES/EBU audio, there are four
combinations. You can select between embedding audio
into channels 1 to 4, 5 - 8, 9 - 12, or 13 - 16.
ETHERNET PoE SDI IN
L - ANALOG
AES/EBU
R - ANALOG
AES/EBU - T/C
PUSH PUSH
OPTICAL
AUDIO
STEREO IN
L R
SDI OUT
1 2
4 5 6
8 9 10
7
3 11 12