Regulatory Notices
Disposal of Waste of Electrical and Electronic Equipment Within the European Union.
The symbol on the product indicates that this equipment must not be disposed of with other
waste materials. In order to dispose of your waste equipment, it must be handed over to a
designated collection point for recycling. The separate collection and recycling of your waste
equipment at the time of disposal will help conserve natural resources and ensure that it is
recycled in a manner that protects human health and the environment. For more information
about where you can drop off your waste equipment for recycling, please contact your local city
recycling office or the dealer from whom you purchased the product.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. Operation of this product in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at
personal expense.
Operation is subject to the following two conditions:
1
This device may not cause harmful interference.
2
This device must accept any interference received, including interference that may cause
undesired operation.
BMD-SDItoHDMI (A)
BMD-HDMItoSDI (B)
BMD-SDItoAnalog (A)
BMD-AnalogtoSDI (A)
BMD-SDItoAudio (A)
MSIP-REM-BMD-201704001
KCC-REM-BMD-OpticalFiber
MSIP-REM-BMD-SDIDistribut
KCC-REM-BMD-SyncGenerator
KCC-REM-BMD-UpDownCross
R-REM-BMD-201804005
MSIP-REM-BMD-201711002
MSIP-REM-BMD-201711001
MSIP-REM-BMD-SDItoHDMI4K
MSIP-REM-BMD-HDMItoSDI4K
MSIP-REM-BMD-SDItoAnalog4K
MSIP-REM-BMD-201410018
MSIP-REM-BMD-201410017
R-REM-BMD-201804004
MSIP-REM-BMD-OpticalFiber4K
MSIP-REM-BMD-SDIMultiplex4K
MSIP-REM-BMD-SDIDistribut4K
MSIP-REM-BMD-QSDItoHDMI4K
R-R-BMD-2020061501
R-R-BMD-2020061503
R-R-BMD-2020061505
ISED Canada Statement
This device complies with Canadian standards for Class A digital apparatus.
Any modifications or use of this product outside its intended use could void compliance to
these standards.
Connection to HDMI interfaces must be made with high quality shielded HDMI cables.
This equipment has been tested for compliance with the intended use in a
commercial environment. If the equipment is used in a domestic environment,
it may cause radio interference.
Regulatory Notices
97
