1
4
Blackhawk™
USB2000
Controller
(
USB2000
)
QUICK
START
GUIDE
Installation Requirements
•
PC or Notebook computer with at least one free USB v1.1 or v2.0 port.
•
Windows® 2000/XP/Vista Operating Systems
(32 or 64-bit versions).
•
Texas Instruments Code Composer Studio Version 3.3 SR2
†
or later.
•
CD ROM Drive.
Inventory of Items Included
1. Blackhawk
USB2000
Controller POD
2. USB 2.0 Compliant Cable.
3. Installation
CD
ROM.
4. Warranty and Product Registration
Cards.
5. Quick Start Guide.
Other Items Required
1. Target Board System — a self-
powered board with a TI DSP and
compatible JTAG header connection
conforming to IEEE 1149.1 Standard.
2. Copy of Code Composer Studio Ver-
sion 3.3 SR2
†
or later.
†
For CCStudio v3.1 you will need the TI USCIF v35.24.0.3 update to be applied first. This is part of
our
USB2000
installer for CCS v3.1. CCS v3.3 requires SR2 or later to be installed, which is available
for download from the TI web site via CCS update advisor. CCS v3.2 not supported.
A.) Importing a Pre-defined Setup or Factory Board
These instructions apply to CCStudio v3.1 and v3.3, but the import dialog varies slightly
between versions. Refer to the USB2000 Installation Guide if more information is needed.
1. Run
CCStudio
Setup.
2. Find
and
select,
bh-usb2000 controller,
from the “platform” pull
down menu located at the top of the middle CCSetup window. (this will
list on only the
USB2000
controller imports).
3. You can narrow down the import options between C24x and C28x by
using the “device” pull down (i.e. select “C28x” to list all TMS320C28x
device imports).
4. When you find your target, or an import that closely matches your target,
highlight the entry and choose the option to “add it to your system”.
5. If this import setup does not completely match your target, you can edit
the properties manually, such as to add a GEL file specific to you H/W.
6. When finished, save the setup and start CCStudio.
B.) Using Create Board for CCStudio v3.1 and later
1. Run
CCStudio
Setup.
2. Select the “Create Board” tab and drag the
BH USB2000 Connection
to
My System
on the left. This will prompt you for a connection name.
You can enter any string you want, but at a minimum, it typically includes
the emulator name and target DSP or board name.
3. Now, highlight the new connection name you added under
My System
and add the available processor(s) shown in the middle window to match
your hardware.
4. Save your setup and start CCS.
4
CCStudio
Setup
This equipment is designed to
be operated under the follow-
ing environmental conditions:
Temperature between 0°C –
55°C. Relative Humidity of
20% - 70% non-condensing.
Operation of the unit outside of
the above range may affect
structual and mechanical
integrity and cause permanent
damage.
Caution is necessasry to
minimize ESD (Electro-stactic
Discharge) which can damage
electronic components. Use in
a controlled environment
where ESD materials and
practices are employed is
highly recommended.
I
MPORTANT
E
NVIRONMENTAL
C
ONSIDERATIONS
Blackhawk
123 Gaither Drive, Mt. Laurel, NJ 08054-1701
www.blackhawk-dsp.com
Blackhawk is a registered trademark of EWA Technologies, Inc.
USB2000-QS-01
