3
SAVE THESE INSTRUCTIONS
For your safety,
read, understand, and follow
the information provided with and on these jacks. The owner and
operator of these equipments shall have an understanding of these jacks and safe operating procedures before
attempting to use. The owner and operator shall be aware that use and repair of these products may require special
skills and knowledge. Instructions and safety information shall be conveyed in the operator's native language before
use of these jacks are authorized. If any doubt exists as to the safe and proper use of these jacks, remove from
service immediately.
Inspect before each use.
Do not use if there are broken, bent, cracked or damaged parts (inlcuding labels). Any
jack that appears damaged in any way, or operates abnormally shall be removed from service immediately. If the
jack has been or suspected to have been subjected to a shock load (a load dropped suddenly, unexpectedly upon
it), immediately discontinue to use until jack has been inspected by a Blackhawk Automotive authorized service
center. It is recommended that an annual inspection be done by qualified personnel. Labels and Operator's Manual
are available from manufacturer.
PRODUCT DESCRIPTION
Blackhawk Air Actuated Axle Jacks are designed for
lifting
, not sustaining, loads ranging from 22 tons thru 30 tons
depending on its model. They are designed to be used vertically. After lifting, loads must be
immediately
supported
by other appropriate means such as jack stands. These jacks are
not recommended
for use in lifting or position-
ing construction trailers, mobile homes, houses and/or other building structures. These jacks comply with applicable
ASME / ANSI
Standards.
SPECIFICATIONS
Figure 1- Model BH6221 Components
Figure 2 - Model BH6301Components
Lift Control Valve
Release Valve
Air Hose Supply Inlet
(1/4" PT)
Air Hose
Carrying Handle
Oil Filler Screw
(not shown)
Extension
Screw
Saddle
Lift Control Valve
Release Valve
Air Hose
Carrying Handle
Oil Filler Screw
(not shown)
Saddle
Wheel
Saddle &
Adapter
Holder
Handle
Position
Release
Adapter
Air Hose Supply Inlet
(1/4" PT)
Handle
Position
Release
Wheel
Capacity
(Ton)
Min.
Ht.
Max.
Ht.
Ext.
Screw
Handle Length
Jack Size
L x W
G.W.(Lbs.)
Model
BH6221
BH6301
22
30
9 7/8"
11"
20 1/4"
18"
4"
N/A
48 3/4"
48 3/4"
22 7/8" x 12 1/2"
22 " x 12 1/2"
96
122
