DAYBLAZER 550 front light
Power button
Fuel gauge
DESIGN
SERIES
TM
Hook
GRID rear light
Power button
Fuel gauge
DAYBLAZER
™
550 FRONT
& GRID
™
REAR SET
USB Rechargeable Light Set
#7149105
QUICK START
1. Push button to power on.
2. SINGLE-Click to cycle modes.
3. Hold 1 second to power off, light powers back on in the last mode used.
FUEL GAUGE
Color LEDs in the power button help you monitor your light battery power,
indicating that it’s time to charge your light.
USB CHARGING
Fully charge the light before first use. The light indicator will flash when
charging. When charging is complete the fuel gauge will be a steady green.
FRONT MODES
LUMENS RUNTIME
Blitz
550 1h
High
275 1.5h
Low
75 5h
Pulse
100 5.5h
Strobe
65 12h
REAR MODES
LUMENS RUNTIME *AUTO-ECO
Solid
40 1.5h -
Pulse
30 4h
+ 2h
Strobe
20 7.5h
+ 2h
ECO
20 20h
-
*Auto-eco switches on automatically at the end of Pulse and Strobe run
times for an additional 2hrs of runtime.
MOUNTING
Fits most handlebars, seatposts, seatstays, racks, and bag light loops.
INCLUDES
(2) Li Po batteries, (1) Dual-head USB-C charging cable, (1) Silicone strap
ACCESSORIES & SPARE PARTS
(Sold Separately)
• Dayblazer 550: Action-camera helmet mount #7105045
• Dayblazer 550: Handlebar mount #7105046
100-50%
50-25%
‹25-0%
100-75%
75-25%
‹25-0%
Silicone strap
WARNING: Potential choking hazard to children. This light is extremely bright—do not aim directly into eyes. UK ONLY: When used for cycling, this light should be used in conjunction with a British Standard 6102/3
cycle light. WARNING: This product contains Bisphenol A which is known to the State of California to cause reproductive harm.
FCC Statement
: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase
the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician
for help. Shielded interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules. Specifications and designs are subject to change
without any notice or obligation on the part of the manufacturer.
Customer Service: 1-800-456-2355
Dual-head cable USB-A to USB-C
Câble de chargement USB à double embout
Zweifach-USB-Ladekabel
