SC-2 User Manual v1.4 Sep 2017
15
track at a time via PIR sensor - moving onto the next audio track in
sequence after each activation.
This allows you to activate track 001 then 002 then 003 etc. one at a
time.
Hold To Play
When switches 1,2,4,5 are in the Down (on) position users must
HOLD the button down to play a track, when released the track will
stop.
7. Delay and Master Volume Control
Two controls on the front of the device allow you to alter the Delay
timer and Master Volume.
Delay
The delay control allows you to specify how long between playing
content the unit must wait before more content can play. This is
mainly used in conjunction with a PIR input, establishing how long
between activation the unit must wait to play more content.
However it can also be used with all other modes if desired.
Switch 7 when Off (up) makes the delay control range from 0-60
seconds, when On (down) it ranges from 0-4 minutes.
With AutoPlay:
When in AutoPlay mode the delay time will specify
how long the unit takes to reset to track 001 (if there are more than
1 track).
