SC-2 User Manual v1.4 Sep 2017
12
6. Content Configuration
Content is added to the SC-2 via MicroSD card, how this content is
played is set via the dip switches located on the front of the device.
Using a screwdriver click these switches into either a Down or Up
position to turn On or Off.
Dip Switch Settings: Down = On, Up = Off
1 - Interruptible Playback
When switch 1 is in the Down (on) position the SC-2 is set to
uninterruptible this means when a file starts to play it will finish no
matter if an additional input is activated. When in the Up (off)
position files can be interrupted.
2 - Looping Playback
When switch 2 is in the Down (on) position the SC-2 will be in
looping mode. All content on the MicroSD card will play in a
sequential manner from power up and then begin again from the
start. The ‘Delay’ control will specify how long the unit waits before
beginning a new loop.
