THE RGB TO DVI(/VGA) CONVERTER
24
4. Device
Control
If you are using the CGA/EGA input (with adaptors only) or use an RGB format stored in the
internal table, no adjustment should be required. In other cases, you may need to optimize the
output using the ACU315A Converter’s on-screen display (OSD). You can access to the
OSD, even if there is no input signal detected!
Figure 4
OSD Utility
You can adjust the following properties using the IR-Remote Control:
•
Brightness/contrast
You can adjust the following properties using the OSD:
•
Auto Configuration ON/OFF
•
Color, Color Temperature adjustments
•
Brightness/contrast
•
Input Image Sizing
•
Output Image Scaling and Sizing
•
Video Mode selection for similar Video Modes (see
Appendix D: Supported Video
Modes
on page 47).
•
OSD operation, factory reset.
Version information
Screen resolution and refresh rate
of the video source
Main menu icons
Submenu/command icons
Menu title