SC-16 User Manual v1.3 June 2017
13
When powered on in this mode the SC-8 will start on audio file 1, it
will then remain on the last file played until it resets to file 1 - this is
specified by the delay timer setting (5-60sec).
Note: If the delay timer is set to 0, the track will not reset.
6 - LCD & Button Pad Activation
Put in the down (on) position to place the SC-16 in compatibility
mode for the LCD display and Button Pad add-on
(sold separately)
.
7 - Delay Range
The delay control allows you to determine how long between the
end of an audio file a new file can be activated. When switch 7 is in
the Up (off ) position, the control ranges from 0 - 60 seconds.
When switch 7 is in the Down (on) position, the delay control will
range from 0 - 4 minutes.
8 - Currently Unassigned on this Model
This will put the SC-8L into programming mode for the lighting
controller. However in the SC-2/8/16 the lighting simply turns on
when audio is being played and off when audio ends.
16 Button Mode
When all switches are in the Up (off ) Position, the SC-16 is in 16
button mode as standard, this means Button 1 plays file 1, and
Button 2 plays file 2 etc.
With switch 1 in the Up (off ) position files are interruptible, put
switch 1 in the Down (on) position to make playback
uninterruptible.
Sequential PIR mode
