SC-16 User Manual v1.3 June 2017
12
When switch 2 is in the Down (on) position the SC-16 will be in
looping mode. All content on the MicroSD card will play in a
sequential manner from power up and then begin again from the
start. The ‘Delay’ control will specify how long the unit waits before
beginning a new loop.
3 - Play All
When switch 3 is in the Down (on) position the SC-16 will be in ‘Play
All’ mode, this means when triggered via button or PIR it plays
through all audio files once. When in this mode the SC-16 is
uninterruptible even with switch 1 set to Up (off).
4 - Next / Previous
When switch 4 is in the Down (on) position the SC-16 is in ‘Next /
Previous’ mode. This means users can navigate through all files on
the MicroSD card by pressing button 1 for next and button 2 for
previous.
When powered on in this mode the SC-16 will always start on audio
file 1, it will then remain on the last file it played.
5 - AutoPlay/Auto Retract Mode
If using the SoundClip with an AutoPlay Handset or AutoRetractor
with AutoPlay you will need to place dipswitch 5 into the Down (on)
position.
When in this position file 001 will play automatically upon pick up.
Add a button to button 2 to allow users to move to the next track (if
one exists). When in AutoPlay mode button 2 operates as ‘Next
Track’.
