blackbox-av 22" AV Point - Modern, Manual

Page: 9 / 11

9
The AV Point can be configured with additional commands should you wish, these can
be included in the Autoplay.txt file.
Vol_plus= Vol_plus=10 Assigns a button to turn up the volume to a
maximum of 31. in the example button 10 will
increment the volume.
Vol_minus= Vol_minus=11 Assigns a button to turn up the volume to a
minimum of 0. in the example button 10 will
decrement the volume
[vol:--] 01[vol:20]=01 When a button is pressed and a folder content is
to be played, The volume can be pre-set. In the
example when button 1 is pressed and folder 1 is
to be played, the volume is preset to 20.
[n] 20[n]=02 When a button is pressed and a folder content is
to be played, The content can be uninterruptable.
In the example when button 2 is pressed and
folder 2 is to be played, the file or files in that
folder cannot be interrupted via another button
being pressed.
Mute= Mute=03 A button can be set to control the AV Point mute
command. In the example, button 3 will not mute /
unmute the audio
Pause= Pause=05 Assign a button to pause/un-pause playback. In
the example button input 5 will be a pause button.
Next= Next=07 Skips to the next track (should you have multiple
files in a currently selected folder) to be played
–
In the example key no 7 is assigned to next.
Prev= Prev=08 Skips to the previous track (should you have
multiple files in a currently selected folder) to be
played
– In the example key no 7 is assigned to
Prev.
Stop= Stop=09 The stop command can be assigned to a button
so that playback will return to the beginning of the
loop file wherever it may be. If the loop is being
played it will start from the beginning. If content is
being played inside a folder, playback will stop
and return to the beginning of the loop file.