9
Rear Panel
1.
INPUTS: Two HDMI® ports for connecting video source devices.
2.
OUTPUTS: One HDMI port for connecting a local display or cascading to
other units, and four RJ45 jacks for connecting the receivers.
3.
IR IN: Four numbered IR input jacks and an IR ALL IN jack for receiving IR
signals to control the remote displays using their native remote(s). The
individual jacks are appropriate for use when two or more displays use
different remote controls, while the IR ALL IN jack is appropriate for use
when all remote displays use the same remote control.
4.
CONTROL: Use the IR OUT jack to connect an IR transmitter to control
the video source device from the remote locations. Use the IR LOOP OUT
jack to connect to a cascaded unit. Use the RS232 connector to connect
your computer using the included RS-232 Cable. Use the FW port to
connect a USB cable (available separately) for performing firmware
upgrades.
5.
AUDIO OUT: Use the SPDIF port to connect to an amplifier or receiver
using a digital optical S/PDIF cable (available separately). Use the L-R
RCA jacks to connect to an amplifier or receiver using an RCA analog
stereo audio cable (available separately).
6.
DC 12V: DC barrel connector for connecting the included AC power
adapter.
