About connecting to a Wi-Fi network for UMA
Depending on your wireless service provider, you might be able to make calls, send and receive email, PIN, SMS text, and MMS messages, and
visit web pages using UMA. Your device must be connected to a Wi-Fi® network to use UMA. For more information, contact your wireless
service provider.
You can connect to a Wi-Fi network without saving the connection information, or you can save the connection information in a Wi-Fi profile.
Change your preferred network type
1.
On the Home screen or in a folder, click the
Options
icon.
2. Click
Network
.
3. Change the
Connection Preference
field.
4. Press the
Menu
key.
5. Click
Save
.
Wi-Fi technology troubleshooting
I cannot connect to a Wi-Fi network
Depending on your BlackBerry® device model, the Wi-Fi® feature might not be supported.
Try performing the following actions:
• Verify that you have turned on the connection to the Wi-Fi network.
• Verify that you are in a Wi-Fi coverage area.
• If the Wi-Fi network does not appear in the Wi-Fi setup application and you know the network name, connect to the Wi-Fi network
manually.
• Verify that the connection options in the Wi-Fi setup application are correct. If you have already verified these options, verify that the
advanced connection options for the Wi-Fi network are correct.
• If you switched Wi-Fi networks manually, switch to another Wi-Fi network or set your BlackBerry device to scan for available Wi-Fi
networks.
• If your wireless service provider supports UMA, verify that your connection preference is not set to Mobile Network Only.
• If your device is associated with an email account that uses a BlackBerry® Enterprise Server, your organization might prevent the
Hotspot browser from appearing or might restrict you from using the Hotspot browser to browse web pages.
• If you are using the Push Button Setup method, verify that the network access point is enabled with Wi-Fi Protected Setup™, and that
it has been set to send its profile. Verify that another device is not also attempting to connect at the same time, and that not more
than one network access point within range is in this mode.
• If you use PEAP, EAP-TLS, EAP-FAST, EAP-TTLS, or EAP-SIM to connect to a Wi-Fi network, verify that you have installed the root
certificate for the certificate authority server that created the certificate for the authentication server.
• If you use EAP-TLS to connect to a Wi-Fi network, verify that you have added your authentication certificate to your device.
User Guide
Wi-Fi technology
248
Summary of Contents for Pearl 9100
Page 2: ...SWD 1072416 0505035951 001...
