4
SECTION 2: INSTALLATION
SECTION 2
Installation
2.1 General Guidelines
•
Outdoor installations
: Use the rubber rings included with the machine screws (4) to ensure that the unit is sealed properly.
Dome cover
Rubber seal
Machine screw
Dome base
•
Dome/window care
: Handle the dome carefully to prevent scratching. If a scratch appears over the lens, adjust the dome
window to move the scratch out of view.
CAUTION
Keep dome cover and camera lens clean. To avoid smearing, do not expose the camera lens to a strong light source such as the
sun or spot lights.
•
Monitor impedance
: Set the monitor impedance switch to 75Ω.
•
Power supply
: To avoid fire or shock hazard, use only a UL
®
listed power supply.
•
Camera drop cable
: The camera drop cable includes two connectors:
—
Power connector
(black with green terminal adapter) – The connector is non-polarized. Use 24 Vac power source
(AC24V 1A adapter) or 12 Vdc power source (DC12V 1A adapter).
—
Video coax connector
(BNC, yellow) – for transmission of the video signal across coax (75 Ω) cable.
