7
High Performance 690TVL CCTV Dome Camera User Manual
SECTION 2: INSTALLATION
4. Adjust the image with the focus and zoom levers as required.
5. Configure your camera using the software menus in the OSD (On Screen Display). See
Software
Setup
in the following section of this manual.
6. Place the dome cover over the base and adjust the dome window. Tighten the captive screws that
secure the cover to the base.
2.5 Cleaning
Clean the camera dome with an approved glass cleaning solution and a lint free cloth.
—
Dust can be removed from the unit by wiping it with a soft damp cloth. To remove stains,
gently rub the surface with a soft cloth moistened with a mild detergent solution, then rinse
and dry it with a soft cloth.
—
Remove all foreign particles, such as plastic or rubber materials, attached to the camera
housing. These may cause damage to the surface over time.
CAUTION
Do not use benzene, thinner or other chemical products on the camera assembly; these
may dissolve the paint and promote damage of the surfaces. Before using any chemical
product, read the accompanying instructions carefully.
