6
www.sc-black.com
SECTION 2: INSTALLATION
2.3 Plastic camera mounting
1. Connect the dome base to the mounting
surface using four (4) screws.
2. Route the power and video cables to the
camera location and attach them to the camera
drop cable (see
General guidelines
above).
2.4 Camera adjustments
1. Attach a video setup monitor to the yellow RCA (EXTRA VIDEO OUT) connector inside the camera
assembly, or setup a remote monitor for viewing video from the camera.
2. Power on the camera and video monitor.
3. While observing video from the camera, adjust the pan/tilt swivel and PCB bracket to aim the
camera in the preferred direction.
Ceiling mounting
Wall mounting
