Keyless Entry Operation
TO LOCK DOORS
*
Press transmitter button 1:
• The parking lights will flash once.
• The doors will lock*.
• The L.E.D. will flash slowly.
IGNITION LOCK*
The ignition locking feature allows the doors to
automatically lock when the ignition key is
turned on, and automatically unlock when the
ignition key is turned off. This feature may be
disabled during installation.
REMOTE PANIC
In the event of an emergency (PANIC) situation,
the system can be triggered for 45 seconds to
attract attention. To activate the Panic Feature,
press transmitter button 1 for 3 seconds:
• The horn will honk*.
• The parking lights will flash.
Press button 1 to exit panic mode and lock the
doors. Press button 2 to exit panic mode and
unlock the doors.The Panic Feature will operate
when the ignition is on.
VALET MODE
When the system is placed into the Valet Mode
the optional keyless entry and trunk release will
still function.
NOTE: Remote Start feature maybe disabled
during valet mode if programmed during
installation.
To enter the Valet Mode:
1. Be sure the system is off.
2. Turn the ignition key on.
3. Press and hold the valet/service mode
switch for 5 seconds.
• The Lights will flash once.
• The LED will turn on solid indicating
the system is in Valet Mode.
To exit Valet Mode:
1. Turn the ignition key on.
2. Press and hold the valet/service mode
switch for 5 seconds.
• The LED will turn off.
• The Lights will flash 2 times.
OPTIONAL TRUNK RELEASE
Press button 3 for approximately 2 seconds to
open the trunk.
Remote Start Operation
Important: Only start the vehicle in a
well ventilated area. Do not use in a
closed garage or indoors. Be sure to
familiarize yourself with all features prior
to using this product.
REMOTE STARTING THE VEHICLE
To remote start the vehicle:
Press transmitter button 4 for 3 seconds.
• The parking lights will flash twice.
• Approximately 2 seconds later the
system will attempt to start the vehicle.
• Once the car has started, the parking
2
*
Optional Feature
