4
Entering Programming
To enter System Programming:
1. Turn on ignition.
2. Within 5 seconds, press valet switch 5
times.
• The siren will chirp 3 times, indicating
that you have entered Programming.
3. Press the valet switch the number times
equal to the Feature you want to change.
• The siren will chirp each time the valet
switch is pressed.
4. Within 5 seconds, press the transmitter
button corresponding to the desired
operating mode for that Feature.
• The siren will chirp to indicate the
setting.
One chirp = Button 1
Two chirps = Button 2
Three chirps = Button 3
5. Repeat steps 3 and 4 to change additional
features.
6. Turn off ignition to save changes.
Programmable Features
Step Function
Button 1
Button 2
Button 3
1.
Arming Mode
Active
Passive
2.
Auto Rearm
Off
On
3.
Normal/Silent Arming
Normal
Silent
4.
Ignition Locking
On
Off
Override Code Set
5.
Ignition Unlocking
All Doors
Driver only
Off
6.
Door Unlock Pulse
Single
Double
7.
Door Lock Pulse Width
1 second
3 seconds
8.
Passive Locking
Off
On
9.
Entry Delay with Passive Arming
Off
On
10. Bad Zone Report
5 seconds
Off
11. Siren / Horn Chirps
Siren only
Horn chirps
12. Horn Honk / Alarming Output
Flashing
Continuous
13. Auxiliary 2 Auto Activate on Arming
Off
On
14. Auxiliary 1 Output
Momentary
Timed
Latched
15. Auxiliary 2 Output
Momentary
Timed
Latched
16. Auxiliary 3 Output
Momentary
Timed
Latched
17. Trunk Disarm Feature
Off
On
18. Remote Start in Valet Mode (optional) Enabled
Disabled
19. Start Module Program (optional)
Learn RPM
Gas
Diesel
20. Automatic Starting (option)
Disabled
Temperature
Voltage
21. FM Module Program (optional)
Learn Module
Learn Transmitter
