Black Widow BW 3650 Installation Manual Download Page 5

5

Programmable Features

1. Siren / Horn Chirps.When set for Horn
Chirps, the horn will honk when arming and
disarming allowing the siren to NOT be
installed.
2. Arming Mode. Select between manual
arming (Active) or automatic arming
(Passive).
3. Passive Locking / Override Code Set.
Selects whether or not the system will
automatically lock the doors with Auto
Rearm and Passive Arming. Pressing Button 3
during this step enters the Override Code
Set mode. Press the valet switch the desired
number of tiimes from 1-15 to set the code.
4. Ignition Locking.

Automatically

locks/unlocks the doors with the ignition.
The system will not lock the doors if any
door is open when the ignition is turned on.
5. Bad Zone Report. Siren will chirp 3 times
if any zone remains open 5 seconds after
arming. If vehicle has delayed dome light,
program this feature to OFF.
6. Auto Rearm. Automatically rearms the
system in case of accidental disarming. The
system must be armed for at least 10
seconds before disarming,

and the

hood/trunk must not be opened or Auto
Rearm will be bypassed.
7. Door Unlock Pulse - Single/Double.
Selects between a single pulse or a double
pulse door unlock output.
8. Arming Chirps. Select Normal or Silent
Arming.
9. Parking Light Operation. Selects whether
the parking lights remain on for 30 seconds
or flash twice after disarming the system.

10. Trunk Disarm Feature. When selected,
activating the Auxiliary 1 function to open
the trunk will automatically disarm the
system.
11. Door Lock Pulse Width. Selects between
a 1-second and a 3-second output for
vehicles equipped with vacuum door locking
systems.
12. Anti-Carjack Mode. Selects one of three
Anti-Carjacking modes: Active, Passive, or
Full-Time. Anti-Carjack Activation  must  be
enabled for any Anti-Carjack mode to
operate (see step 13).
Active. Pressing transmitter Button 4 with
the ignition on will manually activate the
Anti-Carjacking feature.
Passive. When selected, the Anti-Carjacking
feature will activate whenever a door is
opened while the ignition is on.
Continuous. When selected, the Anti-
Carjacking feature will automatically activate
each time the ignition is turned on.
13. Anti-Carjack Activation. Enables  or
disables the anti-carjacking feature.
14. Ignition Arming. When enabled the
system can be armed while the ignition is on
for an extra level of security.

Summary of Contents for BW 3650













Reviews: