System Operation
ARMING OPERATION:
Active Arming
-
To activate the
alarm, simply press button #1
on your remote control.You
will hear one chirp from your
siren, your parking lights will flash one time
(optional).Your doors will lock, and the LED
will turn solid for 10 seconds then it will start
flashing slowly, the system is now armed.
Passive Arming-
If your system was installed
to arm passively, simply turn off your ignition
key and exit the vehicle, the system will arm
30 seconds after the last door is closed. After
you shut off the ignition, the LED will start
flashing rapidly to let you know that the sys-
tem is in the Pre Arm state.You can always
arm the system at any time by pressing button
#1 on the remote.
DISARMING OPERATION:
To deactivate alarm press button #1 on your
remote.The siren will chirp twice and your
parking lights will flash twice
(optional), then stay on for 30
seconds or until you either turn
the ignition on or rearm the
system (optional car location
feature).The LED will stop flashing, the doors
will unlock , your system is disarmed. If you
have the (optional) illuminated entry system
installed the interior light will flash twice then
stay on for 30 seconds or until you turn the
ignition on or rearm the system.
VALET MODE:
Valet
mode will
keep your
alarm sys-
tem from
passive arming (if programmed to be passive
arming), if you need to have your vehicle ser-
viced, or run it through the car wash, etc. To
put your system in Valet Mode,disarm system,
turn the ignition key on and press and hold
your valet/override switch in for approximate-
ly 3 seconds, the LED will turn solid, and siren
will chirp once. Your vehicle’s system is in
Valet Mode. If you have the keyless entry fea-
tures the remote will still lock and unlock the
vehicle while in Valet Mode.To exit Valet Mode:
Turn ignition key on, press and hold
valet/override switch for approx. 3 seconds,
LED will turn off and siren will chirp 2 times.
EMERGENCY OVERRIDE:
If you lose
your
transmit-
ter, or it
fails to
operate the system, unlock door and enter
2
Button 1
LED
Button 2
PRESS
PRESS
+
ON
Press
+
Hold
+
ON
Press
