-
3
-
CONNECTOR PIN NUMBERS AND WIRE COLOR CODES
14-PIN HARNESS
#
COLOR
FUNCTION
NOTES
1)
Red
+12 VDC
Main Power. Connect this wire to the POSITIVE
terminal of the vehicle’s battery, with the supplied
fuse installed.
2)
Wht/Org
Parking
See the wiring diagram for the proper connection of
Light (+)
this wire. For negative output see Page 5.
3)
Orange
Siren (+)
Connect this wire to the RED wire of the Siren.
Output is +12 volts when the alarm is triggered.
4)
Grn/Blk
Door
Negative output pulse to door LOCK circuit. See
Lock (–)
door lock wiring diagrams on Page 5 for connections.
5)
Yellow
Door
Negative output pulse to door UNLOCK circuit.
Unlock (–)
See door lock wiring diagrams on Page 5 for connections.
6)
Gray
Starter
Negative output to the Starter Interrupt relay.
Interrupt (–)
See Wiring diagram for connections.
7)
Red/Blk
LED (–)
Connect to the BLACK wire of the BWS-180 LED.
8)
Wht/Yel
Channel 2
Negative output when 2nd button is pressed.
The output will continue for as long as the button is
held down. See the diagram on Page 5.
9)
Blue
(–) Trip
Negative trip input for connection to an external
shock or motion sensor.
10)
Violet
Valet (–)
Connect to the VALET switch.This switch is needed for
entering the Code Learning Sequence and Valet/Override
functions.
11)
Green
Ignition
Connect to a source of TRUE IGNITION, a wire that is
hot in both the RUN and START positions.
12)
Black
Ground
Connect this wire to a clean, solid GROUND.
Do Not
confuse this wire with the short, black
antenna
wire.
Do Not Ground The Antenna Wire!
13)
White
Positive
Connect this wire to door pinswitches that are
Door (+)
POSITIVE when the door is open.
14)
Blu/Wht
Negative
Connect this wire to door pinswitches that are
Door (–)
NEGATIVE when the door is open.
