background image

8

Programmable Features

1. Arming Mode. Select between manual

arming (Active), automatic arming (Passive),

and automatic arming with chirps that

countdown every 2 seconds until armed.
2. Parking Light Operation. Selects whether

the parking lights flash twice or remain on

for 30 seconds after disarming the system.
3. Auto Rearm. Automatically rearms the

system in case of accidental disarming. The

system must be armed for at least 10

seconds before disarming, and the

hood/trunk must not be opened or auto

rearm is bypassed. If button 3 is selected, the

doors will lock on auto rearm.
4. Arming Chirps. Select Normal or Silent

Arming.
5. Trunk Disarm Feature. When selected,

activating the Auxiliary function to open the

trunk will automatically disarm the system.
6. Ignition Locking. Automatically locks and

unlocks the doors with the ignition. The

system will not lock the doors if any door is

open when the ignition is turned on.
7. Ignition Unlocking.Automatically unlocks

all doors or only driver’s door with ignition.
8. Door Lock/Unlock Pulse. Selects

between a 1 second lock/1 second unlock

for standard vehicles, 3 second lock/3

second unlock for vacuum lock systems, 1

second lock/1 second unlock 2 times for

some Japanese vehicles, and 30 second

lock/1 second unlock to roll up windows

with lock on some German vehicles.
9. Passive Locking. Selects whether or not

the doors will lock with Passive Arming.
10. Open Door Report. Siren will chirp 4

times if a door remains open 10 seconds

after arming. If vehicle has delayed dome

light, program for 60 seconds (the sensor

and trunk still report after 10 seconds).

11. Siren / Horn Chirps.When set for Horn

Chirps the horn will honk when the alarm is

armed, disarmed, and triggered, allowing the

siren to NOT be installed. Button 3 adds horn

chirps with the warn away feature as well.
12. Auxiliary I. Selectable for Momentary,

Timed, or Latched operation.
Momentary operation - the output is active

as long as the transmitter button is held.
Timed operation - the output turns on for

30 seconds each time the transmitter button

is pressed. If the button is pressed again

during the 30 seconds, the output turns off.
Latched operation - the output turns on

when the transmitter button is pressed and

turns off when the transmitter button is

pressed again.
13. Auxiliary 2. Selectable for Momentary,

Timed, or Latched operation.
14. Auxiliary 3. Selectable for Momentary,

Timed, Latched operation or Ignition

Latched operation (turns on with ignition

and remains on until a door is opened).
15. Auxiliary 2 Auto Activate. When

selected, the Auxiliary 2 output can activate

upon system arming or upon system

disarming to turn on accessory items or turn

on sensors, etc.
16. Door Entry Delay with Passive Arming.

When selected, the door input trigger will be

delayed for 15 seconds, allowing access to

the emergency override switch. Only delays

when the system is armed passively.
17. Horn Honk Output. Selects between

pulsed or constant output for the

Brown/white wire.
18. Anti-Carjack Mode. Selects one of three

Anti-Carjacking modes: Active, Passive, or

Full-Time. Anti-Carjack Activation must be

enabled for any Anti-Carjack mode to

operate.

BW3750 new size.qxd  4/14/2004  9:09 AM  Page 8

Summary of Contents for 5-BUTTON SERIES













Reviews: