background image

3

• The siren will sound.
• The parking lights will flash*.

Press button 1 to exit panic mode and rearm

the system. Press button 2 to exit panic

mode and disarm the system. The Panic

Feature will not operate when the ignition is

on.

EMERGENCY OVERRIDE

If the transmitter becomes lost or fails to

operate, the system can be disarmed by

using the emergency override feature.
To override the system:

1. Enter the vehicle.

• Because the system is armed, the

siren will sound.

2. Turn on the ignition key.
3. Press the Valet switch for 3 seconds.

• The siren will stop sounding.

• The starter defeat will be bypassed.

• The system will enter valet mode.

VALET MODE

When the system is placed into the Valet

Mode the security system will be disabled.

However, the optional keyless entry and

auxiliary  features will still function if

installed. The valet feature may be accessed

using the valet switch or using the remote

transmitter.
To enter or exit valet mode using the switch:

1. Be sure the system is disarmed.

2. Turn the ignition key on.

3. Press and hold the valet switch for 3

seconds.

• The siren will chirp once to enter

valet or twice for exit.

• The LED will turn on solid indicating

the system is in valet mode, or turn

off indicating valet mode exit.

To enter or exit valet mode using the

remote:

1. Be sure the ignition key is off.
2. Press transmitter button 2 then button

1 and hold for 3 seconds..
• The siren will chirp once to enter

valet or twice for exit.

• The LED will turn on solid indicating

the system is in Valet Mode, or turn

off indicating Valet Mode exit.

OPTIONAL TRUNK  RELEASE

Press button 3 for approximately 2 seconds

to open the trunk.

OPTIONAL TRUNK  DISARM 

The trunk disarm feature allows the alarm to

disarm automatically whenever transmitter

button 3 is used to activate the optional

trunk release. This eliminates having to first

disarm the alarm before activating the trunk

release.

This feature must be programmed

during installation.

REMOTE SENSOR BYPASS

To arm the system and bypass the shock

sensor, press button 1 to arm, then within 2

seconds press button 4. The siren will chirp

once and sensors will be ignored until the

system is disarmed and rearmed.

OPTIONAL ANTI-CARJACK FEATURE

The optional anti-carjacking feature provides

added security with three operating modes:

Active, Passive, and Full-time.

The Anti-

Carjacking feature may be enabled during

installation.
Active

. Press transmitter button 4 with the

ignition on to manually activate the anti-

carjacking feature. Press  button 4 again to

deactivate the Active carjack feature.

BW3750 new size.qxd  4/14/2004  9:09 AM  Page 3

Summary of Contents for 5-BUTTON SERIES













Reviews: