background image

9

Shock/Page -

The display will show Shock 
and flash the animated      icon 
to indicate shock sensor
triggering.

Hood -

If the hood or trunk is opened 
while the system is armed, the 
display will show HOOD and 
the     icon will be displayed.

UNLOCK

LOCK

O.K.

Arm

Start

Confirm

FM 2-WAY SYSTEM w/ TEXT DISPLAY

Transmitter Operation

Button

I

II

III

III

Hold

+

Operation

ARM/DISARM/PANIC Button - 

To 

arm

 or 

disarm

 the 

system, press button 1. To activate the 

panic

 feature, press button 

1 and hold for three seconds.

TRUNK Button - 

To activate the 

trunk

 output, press and 

hold button 3 for two seconds.

II

III

+

PROGRAMMING Mode - 

To activate the 

trunk

 output, press 

and hold button 3 for two seconds.

CONFIRMATION Button - 

To check current 

status

 of the 

system, press button 3.  The current status of the system will be 

displayed on the transmitter.

Transmitter Indications

START Button - 

To 

start

 the vehicle, press and hold button 2 

for two seconds. To 

shut down

 

the vehicle, press and hold button 

2 for two seconds.

Arm -

The display will show ARM and 
the animated       icon to confirm 
arming.

LOCK

Door -

If a door is opened while the 
system is armed, the display will 
show DOOR, and the door 
frame will animate.

Disarm -

The display will show DISARM 
and the animated        to confirm 
disarming. 

UNLOCK

Warn Away -

The display will show WARN if 
the warning stage is triggered, 
the       icon will flash.

Trunk -

The display will show TRUNK 
and flash the       icon opening 
to confirm

Panic -

The display will show PANIC 
when the Arm/Disarm button 
is held to enter the Panic mode.

(See Owner’s Manual for more details)

Summary of Contents for 250













Reviews: