Black Stone PRO 1858, Owner'S Manual

Page: 16 / 96

STEP 01
Turn gas OFF at control knobs and LP cylinder. Remove
griddle top.
STEP 02
Carefully detach and
remove the burner.
STEP 03
Run a narrow bottle
brush through each burner
tube several times. (Do not use
wire brushes)
Additional Methods Include:
Run a stiff wire bent into a small
hook through each burner tube
several times.
Use an air hose to force air into
burner tube and out burner ports.
Check that air blows through each
hole. (Wear eye protection)
STEP 04
Brush entire outer
surface of burner to remove grime.
STEP 05
Clean any blocked ports
with stiff wire such as an open
paper clip. Then, carefully replace
burners and reattach. Burner
tubes must be reengaged with the
valve openings.
Section 03
CLEANING THE BURNER ASSEMBLY
Unit burners vary, however these instructions apply to all units. Clean
burner assembly and check burner for damage. If any large cracks or
holes are found, replace burner.
Care & Maintenance Model 1858
| Owner’s Manual |
14