ENG
LIS
H
ENG
LIS
H
|
Owner’s Manual
blackstoneproducts/support.com
ENG
LIS
H
ASSEMBLY INSTRUCTIONS
Please read all instructions thoroughly before proceeding. Ensure
that all plastic packing material and any transit protection is removed
before assembling.
Find a large, clean area to assemble your unit. Please refer to the parts list and
assembly diagrams as necessary.
!
WA R N I N G
• Do not mix old and new
batteries.
• Do not mix alkaline, stan-
dard (carbon-zinc) or
rechargeable (ni-cad, ni-mh,
etc.) batteries.
!
WA R N I N G
• Do not mix old and new
batteries.
• Do not mix alkaline, stan-
dard (carbon-zinc) or
rechargeable (ni-cad, ni-mh,
etc.) batteries.
ENG
LIS
H
!
WA R N I N G
The manufacturer has made
every effort to eliminate any
sharp edges. However, you
should handle all compo-
nents with care to avoid
accidental injury.
Some parts may contain
sharp edges, especially as
noted in these instructions.
Wear protective gloves if
necessary.
!
WA R N I N G
The manufacturer has made
every effort to eliminate any
sharp edges. However, you
should handle all compo-
nents with care to avoid
accidental injury.
Some parts may contain
sharp edges, especially as
noted in these instructions.
Wear protective gloves if
necessary.
!
WA R N I N G
This appliance will be hot
during and after use. While
cooking, place unit on
heat-resistant and flame-re-
sistant surfaces to avoid
damage and injury.
!
WA R N I N G
This appliance will be hot
during and after use. While
cooking, place unit on
heat-resistant and flame-re-
sistant surfaces to avoid
damage and injury.
!
WA R N I N G
The manufacturer has made
every effort to eliminate any
sharp edges. However, you
should handle all compo-
nents with care to avoid
accidental injury.
Some parts may contain
sharp edges, especially as
noted in these instructions.
Wear protective gloves if
necessary.
!
C AU T I O N
Two people are recom-
mended for the assembly of
this product.
!
C AU T I O N
Two people are recom-
mended for the assembly of
this product.
STEP 01
Place the cart base upside down and use a wrench to screw on
the four (4) lockable caster wheels. (Ensure that the caster wheels are locked
before attaching them.)
STEP 02
Set the cart base on its
wheels, and use three (3) M6x15
screws (
a
) to attach the left-rear leg
to the cart base.
STEP 03
Use three (3) M6x15
screws (
a
) to attach the front-left leg
to the cart base.
Push to lock
3mm
Model 1902
07
Assembly Guide
