Black Max CPS MD100W, Owner'S Manual

Page: 21 / 28

21
PROGRAMMING/SETTING TEMPERATURE UNITS (°F VS. °C)
1. At Main Screen [ FIG.1 ] press and hold [MODE] until “ PrO ” screen [ FIG.16 ] appears.
“ PrO ” will blink.
APO
°C
°F
°C
°F
Temperature Units Screen
FIG.18
Temperature
Units
( °F or °C)
2. Press [SET] to enter “ PrO ” menu. The
Refrigerant Selection Screen appears [ FIG.17 ].
3. Press [SET] . The Temperature Units Screen
[ FIG.18 ] will appear (blinking).
4. Press [SET] to select this menu. The symbol for
the current units blinks.
5. Use [UP/DOWN ARROWS] to toggle between °F /°C
6. Press [SET] to select °F vs. °C and go to next
menu (Pressure Units), or
7. To return to Main Screen [ FIG.1 ], press and
hold [CLR] .
PROGRAMMING/SETTING REFRIGERANTS
5. To select refrigerant displayed, press [REF] . A tone will sound and counter will
increment by one indicating that the first refrigerant in the sequence of 5 favorites
has been replaced with one selected.
6. To select another refrigerant, repeat steps 3 and 4.
7. To exit this menu and go to the next (Temperature Units Screen), press [SET] , or
8. To return to Main Screen [ FIG.1 ], press and hold [CLR] after step 6.
9. If all 5 refrigerants are changed, manifold automatically advances to next menu
without having to press [SET] . Main Screen [ FIG.1 ] can then be accessed by
pressing and holding [CLR] .
PROGRAMMING/SETTING PRESSURE UNITS (PSIG, KGCM2, KPA,BAR, MPA)
1. At Main Screen [ FIG.1 ] press and hold [MODE] until “ PrO ” Screen appears
FIG.16 ]. “ PrO ” will blink.
2. Press [SET] . The Refrigerant Selection Screen appears [ FIG.17 ].
3. Press [SET] . The Temperature Units Screen (blinking) appears [ FIG.18 ].
4. Press UP ARROW to advance to Pressure Units Screen [ FIG.19 ]. See blinking symbols.
Psig kPa Mpa bar Psig kPa Mpa bar
KgCm2 KgCm2
APO
Pressure Units Screen
Pressure Units
(Psig, KgCm2,
kPa,bar, Mpa)
FIG.19
5. Press [SET] to select this menu.
Current units blink.
6. Use [UP/DOWN ARROWS]
to scroll through units (Psig,
KgCm2, kPa,bar, Mpa)
7. Press [SET] to select pressure
units desired and go to next menu
(Vacuum Units), or
8. To return to Main Screen [ FIG.1 ],
press and hold [CLR] .
www. .com
information@itm.com 1.800.561.8187