Black Max BM905700P Operator'S Manual Download Page 23

Page 19  — English

WARRANTY

Proof of purchase must be presented when requesting  
warranty service.
This product is manufactured by One World Technologies, 
Inc. All warranty communications should be directed to 
One World Technologies, Inc., attn: Generator Technical 
Service at (toll free) 1-800-726-5760.

WHAT IS COVERED UNDER THE LIMITED 
WARRANTY

This BLACKMAX generator is warranted to the original 
purchaser only to be free from defects in material and 
workmanship subject to certain exceptions and limitations 
stated below within these time periods from the date of 
purchase:

 

Three (3) years if the product is used solely for personal, 
family, or household use

 

One (1) year, if the product is used for business or 
commercial use.

Warranties for other BLACKMAX products may vary.

WHAT IS NOT COVERED

This warranty does not apply to damage from misuse, 
alterations, abuse, normal wear and tear, lack of maintenance, 
accidents, or repairs made or attempted by anyone other 
than an authorized service center for BLACKMAX generators.
This warranty does not cover repair if:

 

normal use has exhausted the useful life of the generator 
and wear and tear items (including batteries, fixed and 
removable control panels including corresponding cords 
and plugs, digital displays, tires, outlet plugs and circuit 
breakers, switches, and extension cords if applicable)

 

the customer fails to install, maintain, and operate 
the product in accordance with the instructions and 
recommendations of the company set forth in the 
generator operator’s manual

 

the product is used as rental equipment

 

damage occurs due to freezing, water exposure, rust, 
corrosion, thermal expansion, fire, dropping, or improper 
use.

This warranty does not cover freight or labor charges 
associated with the inspection and testing of generators 
which are found not to be a valid warranty claim. 

Gasoline Engine - Warranty:

 The gasoline engine on 

this generator is separately warranted by the engine 
manufacturer and is serviced through the engine 
manufacturer’s authorized service center network. One 

One World Technologies, Inc.

P.O. Box 319, Highway 8

Pickens, SC 29671

BLACKMAX GENERATOR
LIMITED WARRANTY

World Technologies, Inc., disclaims any and all express 
or implied warranties with respect to the gasoline engine. 

ONE WORLD TECHNOLOGIES, INC., MAKES NO 
WARRANTIES, REPRESENTATIONS OR PROMISES 
AS TO THE QUALITY OR PERFORMANCE OF THIS 
GENERATOR OTHER THAN THOSE SPECIFICALLY 
STATED IN THIS WARRANTY.

HOW TO OBTAIN SERVICE

To obtain service for this BLACKMAX generator 
you must return it, freight prepaid, or take it in to a 
manufacturer- authorized service center for BLACKMAX 
generators. You may obtain the location of the authorized 
service center nearest you by calling

 (toll free)  

1-800-726-5760

 or by logging on to the BLACKMAX 

website at 

www.blackmaxtools.com

. When requesting 

warranty service, you must present the original dated 
sales receipt. The authorized service center will  
repair any faulty workmanship, and either repair or replace 
any part covered under the warranty, at our option, at no 
charge to you.

ADDITIONAL LIMITATIONS

To the extent permitted by applicable law, all implied 
warranties, including warranties of MERCHANTABILITY 
or FITNESS FOR A PARTICULAR PURPOSE, are 
disclaimed. Any implied warranties, including warranties 
of merchantability or fitness for a particular purpose, that 
cannot be disclaimed under state law are limited to three 
years from the date of purchase. One World Technologies, 
Inc. is not responsible for direct, indirect, incidental, 
or consequential damages. Some states do not allow 
limitations on how long an implied warranty lasts and/
or do not allow the exclusion or limitation of incidental or 
consequential damages, so the above limitations may not 
apply to you. This warranty gives you specific legal rights, 
and you may also have other rights which vary from state 
to state. 
This warranty applies to product sold in the U.S.A., Canada, 
and Mexico only.
P l e a s e   c o n s u l t   B L A C K M A X ’ s   w e b s i t e 

 

www.blackmaxtools.com 

or call 

(toll free) 

 

1-800-726-5760

 to locate your nearest  manufacturer-

authorized BLACKMAX generator service facility for 
warranty and non-warranty service on this BLACKMAX 
generator.

Summary of Contents for BM905700P













































Reviews: