Black Max BM905700P Operator'S Manual Download Page 1

OPERATOR’S MANUAL

Manual del operador

5,700 WATT GENERATOR

Generador 5 700 watts

BM905700P

SAVE THIS MANUAL FOR FUTURE REFERENCE

Your generator has been engineered and manufactured to our high standard for dependability, ease of operation, and operator 
safety. When properly cared for, it will give you years of rugged, trouble-free performance.

WARNING:

 

To reduce the risk of injury, the user must read and understand the operator’s manual before using 

this product. If you do not understand the warnings and instructions in the operator’s manual, do not use this product.

Thank you for your purchase.

NEUTRAL BONDED TO FRAME

PUNTO NEUTRO CONECTADO AL MARCO

R

CUSTOMER SERVICE

1-800-726-5760

SERVICIO AL CLIENTE

01 800 843 1111

To register your BlackMax product, please visit:  

http://register.blackmaxtools.com/ 

Para registrar su producto de BlackMax, por 

favor visita: http://register.blackmaxtools.com/ 

NOTICE          AVISO

Do not use E15 or E85 fuel (or 

fuel containing greater than 

10% ethanol) in this product. 

It is a violation of federal law and will damage the unit and 

void your warranty.

No utilice combustibles E15 o E85 (ni combustibles que 

contengan más de 10 % de etanol) con este producto. Esto 

constituye una violación a la ley federal, dañará la unidad 

y anulará la garantía.

GUARDE ESTE MANUAL PARA FUTURAS CONSULTAS

Su generador portàtil diseñado y fabricado de conformidad con nuestras estrictas normas para brindar fiabilidad, facilidad de 
uso y seguridad para el operador. Con el debido cuidado, le brindará muchos años de sólido funcionamiento y sin problemas.

ADVERTENCIA: 

 

Para reducir el riesgo de lesiones, el usuario debe leer y comprender el manual del operador 

antes de usar este producto. Guarde este manual del operador y estúdielo frecuentemente para lograr un funcionamiento 
seguro y continuo de este producto.

Le agradecemos su compra.

Summary of Contents for BM905700P













































Reviews: