background image

9

USER MANU

AL

Black Jack Trailer Jack® User Manual V6.0©

 

6.  Insert the three M10 bolts through the mounting plate and secure with the M10 

lock nuts.

7. 

Tighten the bolts ensuring the whole unit is tightly secured to the A-Frame.

8.  The negative wire (earth) terminates under the head of the Black Jack. Connect 

the other end of the negative wire to the negative terminal on the 12 volt power 
supply or to the chassis. 

9.  The positive black wire enters the underside of the Black Jack head to provide 

power. Connect the other end of the positive black wire to the positive power 
supply. Alternatively, unravel the red wire (supplied with the optional installation 

kit BJTJ-1001) and lay it out along the A-frame to the battery. Secure the wire 

with cable ties. Position the cable in a way to protect it from damage if possible. 

Connect the wire lead to the battery’s positive terminal (+). A 30 amp in-line fuse 

is recommended on the positive wire between the Black Jack and the 12 volt 
power supply.  

10.  Press the extend/retract switch (H) to test that the connection is correct, and 

the jack is working. Also press the LIGHT ON/OFF Switch (C) to confirm the light 

is working.

11.  Push the foot plate up fully and insert the lock pin (K) and retract the jack. 

 

1 1 .   O P E R AT I O N

The Extend\Retract switch is OFF in its natural position. Press EXT to extend the 
Black Jack and RET to retract the Black Jack. WARNING: When the Black Jack is 
fully extended or fully retracted the EXT\RET switch must be released immediately. 

Failure to release the switch can result in significant internal mechanical damage to 

the Black Jack.  

The ON\OFF switch is for the light only. It does NOT switch power on or off to the 
Black Jack

The Black Jack has a built-in circuit breaker which automatically trips and resets. It is 

designed to protect against power surges.

WARNING! Never apply horizontal force against the jack. The load may shift and 
cause the jack to fail, creating a dangerous situation for the user or bystanders.

Summary of Contents for BJTJ- 1001



















Reviews: