4
SAFETY PRECAUTIONS CONTINUED
INSTALLATION
ENVIRONMENT
1)
Water and Moisture
- Do not use this product
near water - i.e., near a bathtub, wash bowl, kitchen
sink or laundry tub; in a wet basement; or near a
swimming pool or the like. Damp basements should
be avoided.
2)
Heat
- The product should be situated away from
heat sources such as radiators, heat registers,
stoves or other appliances that produce heat. Also
avoid putting the unit in the direct rays of the sun.
3.
For indoor use only.
PLACEMENT
1)
Ventilation
- This product should not be placed in
a built-in installation or rack unless proper ventilation
is provided, or the manufacturer's instructions have
been followed.
2)
Foreign Material
- Care should be taken to
prevent objects from falling into and liquids from
spilling into the unit. Do not subject this unit to
excessive smoke, dust, mechanical vibration, or
shock.
3)
Surface
- Place the unit on a flat level surface.
4)
Accessories
- Do not place this product on an
unstable cart, stand, tripod, bracket or table. The
product may fall causing serious injury to a child or
adult and serious damage to the product. Use only
with carts, stands, trips, brackets or tables
recommended by the manufacturer or sold with the
product. Any mounting of the product should follow
the manufacturer's instructions and should use a
mounting
accessory
recommended
by
the
manufacturer.
5)
Carts
- A product and
cart combination should
be moved with care. Quick
stops, excessive force and
uneven surfaces may
cause the product and
the cart combination to
overturn.
6)
Wall or Ceiling Mounting
- The product should
be mounted to a wall or ceiling only as recommend
by the manufacturer.
M
AINTENANCE
Cleaning
- Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning. Do
not use any type of abrasive pad, scouring powder
or solvent such as alcohol or benzene.
SERVICE
1)
Object and Liquid Entry
- Never push anything
through the openings of this product which could
touch dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
2)
Damage Requiring Service
- Unplug this product
from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
a) When the power-supply cord or plug is
damaged.
b) If liquid has been spilled or objects have
fallen in the product.
c) If the product has been exposed to rain or
water.
d) If the product does not operate normally
when following the operating instructions,
adjust only those controls that are covered
by these instructions. Improper adjustment
of other controls may result in damage that
will often require extensive work by a
qualified technician to restore the product to
its normal operation.
e) If the product has been dropped or
damaged in any way.
f) When the product exhibits a distinct
change in performance - this indicates the
need for servicing.
g) When the unit needs broken tubes to be
replaced.
3)
Replacement Parts
- When replacement parts
are required, be sure the service technician uses
replacement parts specified by the manufacturer or
parts with the same characteristics as the original
part. Unauthorized substitutions may result in fire,
electric shock or other hazards.
4)
Tube Replacement
- Should it become necessary
to replace your tubes, carefully follow the instructions
in your Owner's Manual. When replacing your tubes,
remove the AC power plug from the wall and allow
thirty minutes for the high voltage capacitors to
discharge.