21
Crossover installation (Fig.1.9)
Tweeter installation
Do not install crossover in the places exposed to moisture condensation, for example - under the carpet
floor of the passenger’s compartment, or near the air conditioner, etc. Also keep in mind that placing the
crossover next to the high-current circuits of the on-board network can lead to interferences in the audio path.
INSTALLATION
* HCR-3.28 crossovers are not included (to be purchased separately)
1. Using a 1.5 mm screwdriver (included in the kit), unscrew the fixing screws (3 pcs.) from the
protective housing and pull the tweeter out from it (Fig.1.7).
2. Using the same screwdriver, release the clamping screws in the tweeter housing and insert the
acoustic wires into the terminal block, and then tighten the clamping screws securely to fix the speaker wires.
(Fig.1.8)
3. Assemble the tweeter in the reverse order.
(Fig.1.7)
(Fig.1.8)
Summary of Contents for HGC-2.28
Page 1: ...1 ...
Page 30: ...http blackhydra audio ...
