DECATHLON-
Item code:BH26.
INSTRUCTION MANUAL
4
5. Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
4. Drill 1,5mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo. Install servo into ai-
leron servo tray as same as picture below.
3. Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
Repeat the procedure for the other wing
half
.
1. Using a ruler & pen to draw a straight
line as below picture.
INSTALLING THE AILERON CONTROL HORN.
3x40mm.
Nilon control clasp.
M3 lock nut.
Electric wire.
Thread.
Remove the covering.
Thread.
Bottom of wing.
Remove the covering.
